Article archive
Frequency change BVN February 2018
25/01/2018 11:00
To change the settings on a Fortec Star receiver: Select Menu,next select Antenna setup,next use Red button to edit TP,
with arrow keys select Frequency, with the numbers keys type 12089 (the new frequency) next, with the arrow keys select Symbol rate
use the number keys again to type 13500...
>>
———
Weak signal new BVN Transponder
10/02/2017 14:45
We received hundreds of phone calls regarding the Transponder change of BVN
Most of the time all the changes where done correct but was a "Fail" or a "no signal" the result after the change.
This is due to the very weak signal from the transponder. According BVN this was supposed to be an...
>>
———
Frequency Change BVN on a Geosat Receivers
02/02/2017 17:50
press menu select Channel search or motor setup then press the Red button for TP edit next select the satellite Satmex 6 113W KU next enter Transponder Frequentie 12076 next select Symbol rate and enter 5787 make sure Polarization is set to H next select search option (One TP FTA)...
>>
———
BVN Change on EMTech and Viewsat receivers
02/02/2017 17:46
For those using a Viewsat receiver.
To change the settings for watching BVN. Press STB next you press Menu with Ok select installation you now have to enter your password (default is 0000)
next select Channel scan and press OK press down arrow until at the bottom of the screen an orange...
>>
———
Frequency change BVN Nfusion and Blujay Receivers
25/01/2017 11:20
As of February 10 BVN is changing to a new Transponder (Transmitter) your dish does NOT need to be changed.
To change the settings on a Fortec Star receiver: Select Menu,next select Antenna setup,next use Red button to edit TP,
with arrow keys select Frequency, with the numbers keys type 12076 (the...
>>
———
BVN signal
04/02/2016 16:39
As many of you have already noticed, the signal of BVN is not consistent.
In a reply to our emails BVN administration informed us that they are aware of the problem and working on a solution.
We will keep you posted.
>>
———
Closed on Saturdays
31/01/2016 16:42
Due to the growing number of larger projects both residential and commercial, and to better serve our customers our showroom will be closed on Saturdays as of February 1st, 2016.
Both on Mondays and Saturdays we will be checking the voicemail in the morning and evening after returning from our...
>>
———
Canadian Dairy XPO
15/01/2015 08:59
Come and see us at the Canadian Dairy XPO in Stratford on February 4 and 5
See the latest in surveillance camera's.
Find out how you can keep an eye on your farm no matter where you are.
>>
———
Settings change for Geosat and Sonicview receivers
05/01/2015 10:34
To receiver BVN again on a Geosat MicroHD receiver: Select Menu then select the Installation icon. Next select Single sat search and make sure Scantyp is "FTA only" next highlight search and press ok. After search end, select yes and leave the menu.
BVN will no longer be on your previous preset so...
>>
———
Settings change Viewsat and EMtech receivers
03/01/2015 11:27
For those using a Viewsat receiver.
To change the settings for watching BVN. Press STB next you press Menu with Ok select installation you now have to enter your password (default is 0000)
next select Channel scan and press OK press down arrow until at the bottom of the screen an orange...
>>